Patton electronics SmartNode Series Software Configuration Manual page 609

SmartWare Software Configuration Guide
Mode: Registration outbound
Step
1 [node](regout)#proxy <host> [<port>]
[strict-route]
or
[node](regout)#proxy <index> <host>
[<port>] [strict-route]
or
[node](regout)#proxy before <index>
<host> [<port>] [strict-route]
or
[node](regout)#proxy after <index> <host>
[<port>] [strict-route]
Mode: Registration outbound
Step
1 [node](regout)#proxy <index> down <posi-
tions>
or
[node](regout)#proxy <index> up <posi-
tions>
Mode: Registration outbound
Step
1 [node](regout)#no proxy [<index>]
Mode: Registration outbound
Step
1 [node](regout)#proxy none
Location Service configuration task list
Command
Command
Command
Command
Purpose
Adds a new proxy entry to the registration out-
bound face. For each proxy configured there is a
route-header added. If more than one proxy entry
has to be entered, the order of the list can be mod-
ified by using the index and/or the insert key-
words before and after.
Purpose
If multiple proxies are configured the entry at the
index can be moved in the proxy list up or down
the number of positions given in the command.
Purpose
Removes the proxy entry at the index or remove all
proxy entries if no index is given.
Purpose
Removes all proxy entries and disables explicitly
the use of a proxy.
51 • Location Service
609