SmartWare Software Configuration Guide
DHCP-server and DHCP-client are illustrated in
DHCP Clients
DHCP-client configuration tasks
To configure the SmartNode as DHCP-client perform the steps mentioned below.
•
Enable DHCP-client on an IP interface
•
Release or renew a DHCP lease manually (advanced) (see
•
Get debug output from DHCP-client (see
•
Configure DHCP agent
Enable DHCP-client on an IP interface
On every created IP interface a DHCP-client could be enabled. If enabled, the SmartNode gets the IP address
for this interface from a DHCP-server. Additionally other configuration information is received for this IP
DHCP-client configuration tasks
figure
LAN
LAN
Node
Node
LAN
DHCP Server
Figure 44. DHCP-client and DHCP-server
page
294)
44.
Node
Node
WAN
DHCP Clients
Node
Node
page
294)
27 • DHCP configuration
DHCP Server
292