Creating An Identity - Patton electronics SmartNode Series Software Configuration Manual

SmartWare Software Configuration Guide
and the Context SIP Gateway has more than one transport binding, it is recommended to add the local host
addresses as Domain to the appropriated location services.
Mode: Location Service
Step
1 [node](ls)[name]# [no] domain <name>
or
[node](ls)[name]#domain <index> <name>
or
[node](ls)[name]#domain before <index>
<name>
or
[node](ls)[name]#domain after <index>
<name>

Creating an identity

An identity represents one of multiple possible addresses over which a user is reachable (e.g.
sip:john@inalp.com). Many configuration parameters related to call signaling, which were configured on the
gateway or the sip interface, can now be configured per identity. This leads to a huge range of configuration
possibilities in the identity.
According to the relationship between an identity and user, there can be many different aspects configured. If
you are the user agent for a certain identity, use the outbound faces to specify the behavior when sending
requests. If you are not the user agent of an identity but know this identity, then use the inbound faces to con-
figure the behavior when this identity sends requests.
When creating an identity, it is important to consider that the name of the identity is always used as user-part
when building a sip-uri. The name of the identity is also used when comparing to or matching with a sip-uri.
Mode: Location Service
Step
1 [node](ls)[name]# [no] identity <name>
Mode: Identity
Step
1 [node](identity)[name]# [no] display-
name <display-name>
Mode: Identity
Step
1 [node](identity)[name]# [no] phone-con-
text <phone-context>
Location Service configuration task list
Command
Command
Command
Command
Purpose
Adds a new domain to the location service. If
more than one domain has to be entered, the
order of the list can be modified by using the index
and/or the insert keywords before and after. The
no form of the command removes an existing
domain from the list.
Purpose
Adds a new identity to the location service. The no
form of the command removes an existing identity.
Purpose
Adds a display-name to the identity. The no form
removes the display-name.
Purpose
Adds a phone-context to the identity. The no form
removes the phone-context.
51 • Location Service
604