Stabilizer Bar Replacement - Honda S2000 Service Manual

Stabilizer Bar Replacement
1 .
2 .
Raise the front of the vehicle, and support it with
safety stands in the proper locations
( s e e p a g e 1 - 1 3 ) . R e m o v e t h e f r o n t w h e e l .
Remove the clips (A) and flange bolts (B), then
remove the splash guard (C).
9.8 N.m {1.0 kqf.m,7.2lbt ftl
Remove the self-locking nuts {A) while holding the
joint pins (B) with a hex wrench (C), and disconnect
t h e s t a b i l i z e r l i n k s ( D ) f r o m t h e s t a b i l i z e r b a r ( E ) o n
the right and left.
A
10 x 1,25 mm
38 N.m {3.9 kgf.m.
28 tbf.ftl
4. Remove the bolts (A) and bushing holders (B). then
remove the bushings (C) and the stabilizer bar (D).
A
lnstall the stabilizer bar in the reverse order of
r e m o v a l .
NOTE: Refer to Stabilizer Link Replacement to
connect the stabilizer bar to the links.
5 .
1 0 x 1 . 2 5 m m
39 N.m (4.0 kgf.m.
18-17