Honda S2000 Service Manual page 137

45.
46.
48.
47.
Installthe exhaust manifold using new gaskets and
new self-locking nuts {see step 3'l on page 6-50).
Installthe exhaust manifold bracket. Make sure the
smooth sides of the washers face the exhaust
manifold bracket (see step 32 on page 6-50).
Put the exhaust manifold cover on the exhaust
ma nifold.
Install the heat shield (see step 34 on page 6-50).
Tighten the four bolts securing the exhaust
manifold cover (see step 35 on page 6-50).
lnstall the water bypass hose, and tighten the two
bolts securing the intake manifold bracket (see step
37 on page 6-51).
Installthe water outlet cover (see step 38 on page
6 - 5 1 ) .
Install the air hose. and tighten the bolt securing
the intake manifold bracket (see step 39 on page 6-
Install the evaporative emisslon (EVAP) control
canister hose (see step 40 on page 6-52).
Install the fuel feed hose, fuel return hose and
brake booster hose (see step 41 on page 6-52).
I n s t a l l t h e i d l e r p u l l e y b a s e ( A ) , t h e n i n s t a l l t h e i d l e r
p u l l e y ( B ) .
5 0 .
3 t .
52.
53.
54.
5 5 .
10 x 1.25 mm
44 N.m
{4.s kgf.m, 33 lbf.ft)
'10 x 1,25 mm
4il N.m
(4.5 kgf m,
33 tbf.fr)
6 x 1 . 0 m m
12 N.m 11.2 kgf.m,8.7 lbf.ft)
56.
5 7 .
58.
Installthe alternator (see page 4-26).
Installthe auto-tensioner {see page 4-27).
Install the water pump pulley.
6 x 1 . 0 m m
'14 N.m
{1.4 kgf.m,
10 tbt.ft)
59. Installthe water bypass hose (A). and tighten the
three bolts (B) securing the water bypass tube.
5 x 1 . 0 m m
12 N.m
(1.2 kgf.m,8.7 lbt.ftl
6 x 1 . 0 m m
1 2 N m
{1.2 kgf.m, 8.7 lbf.ft)
(cont'd)
>1r',
-a n)f
o
"o9-,,
5;9il
6-23