Honda S2000 Service Manual page 1054

10. Disconnectthe driver's airbag connector (A),
passenger's airbag connector (B), and passenger's
seat belt tensioner connector (C).
1
'1.
Disconnect the special tool from the SRS main
harness.
Disconnect the SRS unit 18P connector (A) from the
S R S u n i t .
Check resistance between the No. 4 terminal and
the No. 1 1 terminal of the SRS unit 18P connector.
There should be an oDen circuit, or at least 1 M o.
SBS UNIT I8P CONNECTOR
Wire side of female terminals
ls the resistance as specified?
YES - Faulty SRS unit; replace the SRS unit (see
p a g e 2 3 - 7 5 ) . 1
NO Short in the SRS main harness; replace the
S R S m a i n h a r n e s s . l
1 '
1 3 .
23-41