Honda S2000 Service Manual page 1052

10. Disconnect the driver's airbag connector (Al.
passenger's airbag connector (B), and passenger's
seat belt tensioner connector (C).
1 1 . Disconnect the SRS unit 18P connector (A) from the
SRS unit. Do not disconnect the sDecial tool from
the SRS main harness.
12.
Check resistance between the No. 4 terminal and
the No. 11 terminal of the SRS unit 18P connector.
T h e r e s h o u l d b e 2 . 0 - 3 . 0 Q .
SRS UNIT 18P CONNECTOR
\
GRN
-
+
5 6
7 8 9
q
lofulTllts
1 4
t 3
t o
1 7
1 8
lcnrv
Wire side ot temale terminals
ls the resistance as specified?
YES - Faultv SRS unit or poor contact at the SRS
unit 18P connector and the SRS unit. Check the
connection; if the connection is OK, replace the
SRS unit (see page 23-75).1
NO-Ooen or increased resistance in the SRS main
harness; replace the SRS main harness.l
23-39