Mainshaft Disassembly - Honda S2000 Service Manual

Manual Transmission
Mainshaft Disassembly
l .
Support ball bearing (A) with a commercially
available bearing separator, and remove the ball
bearing using a press as shown.
R e m o v e t h e 3 r d g e a r , 3 5 x 3 0 x 3 5 m m n e e d l e
bearing. distance collar, double cone synchro,
synchro spring, and 3rd/4th synchro sleeve.
Support 4th gear (A) with a commercially available
bearing separator, and remove the 3rd/4th synchro
hub (B), double cone synchro, and 4th gear using a
oress as snown,
PRESS
13-30
4 .
1 .
Remove the 42 x 47 x 30.5 mm needle bearing,
distance collar,sth gear, synchro ring, and synchro
s p r i n g .
Support 6th gear (A)with a commercially available
bearing separator, and remove the 5th/6th synchro
hub/sleeve (B), synchro ring, synchro spring. and
6th gear using a press as shown.
Remove the 39 x 44 x 26 mm needle bearing.
Support ball bearing (A)with a commercially
available bearing separator, and remove the ball
bearing using a press as shown.
PRESS