Seat Belts
J
a
Seat Belt Replacement (cont'd)
Seat Belt Buckle
1. Remove the seat (see page 20-86).
NOTE: To get to the seat belt switch connector, remove the seat cushion from the inner seat track.
2. Remove the seat belt buckle in numbered sequence
3. Install the buckle in the reverse order of removal, and note these items:
. Assemble the washers on the center anchor bolt. Refer to the Anchor Bolt Construction
. Apply liquid thread lock to the center anchor bolt before reinstallation.
. Apply liquid thread lock to the seat mounting bolts before reinstallation
OSEAT BELT
SWITCH CONNECTOR
Detach.
O Pull up the seat cushion.
Do not pull up it in too far.
a!) 10 x 1.25 mm
,t? N.m
(4.8 kgl.m,
35 tbt.ft)
I
6 )8 x 1.25 mm
22 N.m 12.2 kgl m,
16 tbf.ftl
€]CENTER ANCHOR BOLT
7/16-20 UNF
34 N.m 13.5 ksI.m,25 lbf.ft)
23-6