Honda S2000 Service Manual page 488

Rear Differential
Differential Disassembly (cont'dl
Remove the companion flange using a
commercially available bearing puller as shown.
Remove the drive pinion (A) and pinion spacer (B)
by tapping on the drive pinion with a plastic
h a m m e r .
1 0 .
1 5 - 1 6
1 1. Remove the bearing outer race (A), tapered roller
bearing (B), thrust washer (C), and oil seal (D) from
the differential carrier housing.
Remove the bearing outer race from the differential
c a r r i e r h o u s i n g .
12