Manual Transmission
Transmission Removal (cont'dl
16. Disconnect the 2P connector (A) from the steering
17. Disconnect the torque sensor 3P connector (C), and
remove the wire harness clamp (D).
'18.
Remove the wire harness (A) and mounting bolt,
then remove the intake manifold stay (8).
13-8
1 9 .
Disconnect the heated oxygen sensor (HO25) {A),
secondary heated oxygen sensor {secondary
HO2S) (B), and the back-up light switch (C)
connectors, then remove the wire harness from the
transmission.
Remove the three way catalltic converter (TWC)
(A) and gaskets (B).