23.
24.
lnstall the rocker arm assembly.
Check the alignment of the TDC marks {A) on the
cam chain sprocket with the cylinder head surface.
25. Align the TDC marks (B) on the intake camshaft
gear (C) and the exhaust camshaft gear (D), and
installthe camshafts.
26. Apply engine oil to the bolt threads of all the
camshaft holder bolts.
27. Put the camshaft holders on the cylinder head. then
t i g h t e n a l l b o l t s t o 2 2 N . m { 2 . 2 k g f . m , 1 6 l b f . f t ) .
Cylinder Head Bolts Torque Sequence:
28. Make sure the camshaft gears are at TDC.
Adjust the valve clearance (see page 6-12).
Install the cylinder head cover (see page 6-53).
29.
(cont'd)
6-49