1 9 .
1 8 . R e m o v e t h e 1 0 m m f l a n g e b o l t , t h e n r e m o v e t h e I
x 63 pin (A) and l-2 shift levers (B).
Remove the 5 x 25 spring pin (B) from shift arm A
with a 5 mm pin driver, then remove the shift rod
(c).
Remove the shift arm A from the interlock (D), then
remove the select return spring (E) and the 8 X 40
p i n ( F ) .
20.
t
-
.J----r--..-
\
,
/
2 2 .
2 1 . R e m o v e t h e 1 - 2 s h i f t p i e c e .
Remove the 34 mm sealing bolt (A) from the clutch
n o u s I n g .
Expand the 68 mm snap ring (B) on the
countershaft ball bearing, and remove it from the
g r o o v e u s i n g a p a i r o f s n a p r i n g p l i e r s .
Remove the mainshaft, countershaft, and shift
forks assemblies (C), and remove the 64 mm spring
washer, reverse idler gear (D), thrust washer.
(conl'd)
23.
24.
13-25