Rear Brake Caliper Overhaul - Honda S2000 Service Manual

Gonventional Brake Components
Rear Brake Caliper Overhaul
Frequent inhalation of brake pad dust, regardless of material composition, could be hazardous to your health.
. Avoid breathing dust particles.
. Never use an air hose or brush to clean brake assemblies. Use an OsHA-approved vacuum cleaner.
Disassemble. inspect, and reassemble the caliper, and note these items:
. C l e a n a l l p a r t s i n b r a k e f l u i d a n d a i r d r y ; b l o w o u t a l l p a s s a g e s w i t h c o m p r e s s e d a i r .
. Before reassembling, check that all parts are free of dirt and otherforeign particles.
. Replace parts with new ones as specified in the illustration.
. Make sure no dirt or other foreign matter gets into the brake fluid.
. Make sure no grease or oil gets on the brake discs or pads.
. Do not reuse drained brake fluid.
. Always use Honda DOT 3 Brake Fluid.
. Coatthe piston, pistonseal groove, and caliper bore with clean brake fluid.
. Reolace all rubber oarts with new ones.
19-24