Honda S2000 Service Manual page 106

9. Remove the throttle cable (A) by loosening the
locknut (B), then slipping the cable end out of the
accelerator linkage. Take care not to bend the cable
when removing it. Always replace any kinked cable
with a new one.
Remove the four bolts (A) securing the electrical
power steering (EPS) control unit (B).
1 0 .
1 1. Remove the battery cable (A) from the main
under-hood fuse/relay box, then remove the
harness clamos (B).
Remove the banery cable (A) from the auxiliary
under-hood fuse box, and remove the ground cable
( B ) a n d h a r n e s s c l a m p s ( C ) .
13. Remove the grommet (D), then pull out the Ecfvl
connectors.
(cont'd)
5-3