Manual Transmission
Shift Forks Clearance Inspection (cont'dl
Measure the clearance between the 1-2 shift lever
and each shift fork and shift piece. lf the clearance
exceeds the service limit, go to step 6.
Standard: 0-0./r mm (0-0.016 in.l
Service Limit: 0.5 mm (0.020 in.)
I.2 SHIFT FORK
1-2 SHIFT PIECE
13-48
SHIFT PIECE
6 . M e a s u r e t h e w i d t h o f t h e 1 - 2 s h i f t l e v e r .
. l f t h e w i d t h o f t h e 1 - 2 s h i f t l e v e r i s l e s s t h a n t h e
service limit, replace the 1-2 shift lever with a
n e w o n e .
. l f t h e w i d t h o f t h e 1 - 2 s h i f t l e v e r i s w i t h i n t h e
service limit, replace the shift fork or shift piece
with a new one.
Standard: 17.0 - 17.2 mm {0.669-0.677 in.)
Service Limit: 16.9 mm (0.665 in.)
REVERSE