Propeller Shaft Installation - Honda S2000 Service Manual

Driveline/Axle
Propeller Shaft Installation
' t .
t
Install the propeller shaft (A) onto the rear
differential (B) by aligning the reference marks (C).
NOTE: When the propeller shaft is replaced, align
the white marks (D) on the new propeller shaft with
the white mark on the differential,
SPECIAL BOLTS
Replace.
8 x 1,25 mm
32 N.m (3.3 kgt m.24lbf.ftl
lnstall the oropeller shaft {.A) to the transmission (B)
by aligning the reference marks (Cl.
NOTE: When the propeller shaft is replaced, align
the white marks (D) on the new propeller shaft with
t h e w h i t e m a r k o n t h e t r a n s m i s s i o n ,
SPECIAL BOLTS
Replace.
8 x 1.25 mm
32 N.m {3.3 kgf.m,24lbf.ft)
1 6 - 1 8
3. Installthe propeller shaft protector (A).
8 x 1.25 mm
22 N.m 12.2 kgf.m, '16lbf.ft)