6. Raise the 27 mm locknut tab from the qroove in the
secondarv shaft.
Install the special tool onto the companion flange,
and loosen the 27 mm locknut.
7 .
a'::.1-.:,
8. Remove the 27 mm locknut (A), spring washer (B).
b a c k - u p r i n g ( C ) , a n d O - r i n g { D ) ,
Remove the companion flange (A) using a
c o m m e r c i a l l y a v a i l a b l e b e a r i n g p u l l e r ( B ) a s s h o w n .
(cont'd)
1 3 - 1 9