Driver's Airbag; Passenger's Airbag; Seat Belt Tensioner - Honda S2000 Service Manual

sRs
4
Precautions and Procedures (cont'd)
1. Disconnect the battery negative cable, and wait at
least 3 minutes.
Driver's Airbag
2. Remove the access panelfrom the steering wheel,
then disconnect the driver's airbag 2P connector
(A)from the cable reel.
Passenger's Airbag
3. Remove the passenger's dashboard lower cover
(see page 20-81), then disconnect the passenger's
airbag 2P connector {A} from the SRS main harness.
':- - "-^\'.
l
\
--""'=-\
\''
23-16
!,
Seat Belt Tensionar:
4. Remove the roll bar uppertrim (see page 20-7'l),
then disconnect the seat belt tensioner 2P
connector {A) from the SRS main harness.