Differential Case Assembly Removal And Installation - Honda S2000 Service Manual

Differential Case Assembly Removal and Installation
1. Remove the output shafts {A) from the differential
c a s e a s s e m b l y u s i n g t h e p r y b a r s ( B ) .
2. Remove the ten mounting bolts in a crisscross
pattern an several steps, then remove the
differential case assemblv.
3. Remove the dirt and oilfrom the sealing surfaces.
Apply liquid gasket (P/N 08718-0001) to the sealing
surface. Be sure to seal the entire circumference of
the bolt holes to prevent oil leakage.
NOTE:
. lf 5 minutes have passed after applying liquid
gasket, reapply it and assemble the housings.
. Allow it to cure at least 20 minutes after assem-
bly before filling the differential with oil.
Liquid gasket
Installthe differential case assembly, then torque
the 10 mounting bolts in a crisscross pattern in
several steps.
s B H g o
H T I ] U S
'o1l*T,.-.',r,0*,
u
ff fiq B
--------------S
-
15-9