Driveline/Axle
7 .
Driveshafts Disassembly (cont'd)
Wrap the splines on the driveshaft with vinyl tape
(A) to prevent damage to the boot.
Remove the inboard boot. Be careful not to damage
the boot.
9. Remove the vinyl tape.
16-6
Outboard Joint Side:
1. Pry up the three tabs (A)with a screwdriver, then
lift up the end of the band. Be careful not to
damage the boot.
2. Slide the outboard boot to the inboard joint side Be
careful not to damage the boot.