Honda S2000 Service Manual page 219

1 1 .
1 0 .
1 2 .
Tighten the bleed bolt as soon as coolant starts to
run out in a steady stream.
Install the bleed cap on the heater bypass tube as
soon as coolant starts to run out in a steady stream.
With the radiator cap off, start the engine and let it
run until warmed up {radiator fan comes on at least
twice). Then, if necessary, add more Honda All
Season Antifreeze/Coolant Type 2 to bring the level
back up to the bottom of the filler neck.
Put the radiator cap on tightly, then run the engine
a g a i n a n d c h e c k f o r l e a k s .
10-9