Reset Speakerphone - AT&T DEFINITY User Manual

Reset Speakerphone

You can adjust the speakerphone to the surrounding room acoustics to provide
optimal performance. Use the Reset Speakerphone feature in the following ways:
Whenever you move your voice terminal to another place (even in the same room)
Whenever the red light next to [
Note: You may also use this feature when you are on a call in the unlikely event
your speakerphone makes a squealing noise during the call. Your speakerphone
will adjust itself to normal for that call. (No tones will be heard.)
Important: If there has been an interruption in power (such as, the system has
just been powered up again, or you have plugged in the voice terminal at another
location), the light next to [
speakerphone.
You can initiate the Reset Speakerphone feature when your handset is on-hook, or
during a call in which you are using the built-in speakerphone. (If a call is in
progress, you will not hear the tones, and the new speakerphone adjustment is reset
for only the duration of that call.)
Remember that you can use the Reset Speakerphone feature only if your voice
terminal is set for the Speakerphone feature (as opposed to the Speaker feature).
When you first power up the voice terminal, the following display appears.
Begin
To reset the
speakerphone (when the
voice terminal is first
powered up)
] is fluttering
Speaker
] flutters until you reset the built-in
Speaker
PLEASE RESET SPKR.
1 Press the softkey below Begin to reset the
speakerphone
(Press the softkey below Cancel if you do not want
to reset the speakerphone at this time. However,
note that the red light next to [
to flutter.)
If you press the softkey below Begin, the display
shows the following timed screen:
OPTIMIZING PERFORMANCE
OF THE SPEAKERPHONE.
You will hear a set of rising tones as the
speakerphone adjusts itself to the surrounding
acoustical environment. These tones are
automatic. No user response is required.
Cancel
] will continue
Speaker
31