Table of Contents
Advertisement
Syn248 Installation and Configuration Guide
Deskset Installation
Figure 9 identifies the features on the bottom and side of the Deskset. You can install
the Deskset on a desktop or mount it on a wall.
1. Network Port
2. PC Port
3. Reset Button
4. Power Jack
5. Corded Headset
Jack
6. Handset Jack
7. Wall-Mount Slots
Installation
7
4
1
2
3
Figure 9. Deskset Connections
The two LEDs next to each network port indicate network
status and AC power status.
The green LED is on when the Deskset is connected to
the network and has AC power.
The yellow LED flashes when there is network activity.
Intended for connecting an end-user PC to share the same
LAN connection as the Deskset.
Restarts the Deskset when pressed momentarily.
Restores factory defaults when pressed and held for more
than five seconds with the LAN cable disconnected.
For connecting the AC adapter to the Deskset. The Deskset
also supports Power over Ethernet.
Actual jack location may be different than shown
See
"To install the Deskset on a wall:" on page
19
Back to Contents
5
6
22.
Advertisement
Table of Contents
Troubleshooting
