Deskset Reset - AT&T SB67030 System Administrator Manual

AT&T SB67010 Gateway, SB67030 Deskset System Administrator's Guide

Deskset Reset

Press the RESET button shown in Figure 55 by inserting a pen or paper clip into the hole and applying pressure to the button.
Pressing the RESET button for less than five seconds reboots the Deskset (your user settings are unaffected).
Pressing the RESET button for more than five seconds resets the Deskset to factory defaults and clears the system
configuration (your user settings, Personal directory list, and the extension number). This is a complete reset, unlike the
Restore Default Settings option in Admin Settings on the Deskset.
If you are concerned about accidentally erasing all data, simply unplugging the power cord, then plugging it back in will
also power cycle and reboot the unit.
Getting Started
Reset Button
Figure 55. Deskset Reset Button
54