Deskset Installation - AT&T SB67010 PSTN Installation Manual

Synapse Installation Guide

Deskset Installation

Figure 19 identifies the features on the bottom and side of the Deskset. You can install
the Deskset on a desktop or mount it on a wall. Figure 19 represents the SB67030/031
Deskset. Although the SB67020/025 Deskset is slightly different, its features have the
same basic layout.
1. Network Port
2. PC Port
3. Reset Button
4. Power Jack
Installation
The SB67031 Deskset is compatible only with Synapse systems with software
version 1.9.5 and later. Ensure you have upgraded your system to software
version 1.9.5 or later before installing an SB67031 Deskset.
1
Figure 19. Deskset Connections
The two LEDs next to each network port indicate network
status and AC power status.
The green LED is on when the Deskset is connected to

the network and has AC power.
The yellow LED flashes when there is network activity.

Restarts the Deskset when pressed momentarily.
Restores factory defaults when pressed and held for more
than five seconds with the LAN cable not connected.
SB67020/025 and SB67031 Desksets also support Power
over Ethernet.
7
5
4
2
3
36
Back to Contents
6