Led Meanings For Hotel Extension Status Operation Without Message Status Active - AT&T MERLIN LEGEND System Reference Manual

Features
Message Status Operation
2-128 Direct Station Selector
The meaning of the red LED next to the DSS button for each room is shown in
Table 2-8.
Table 2-8 LED Meanings for Hotel Extension Status Operation without
Message Status Active
Extension
LED
Status Status
Off 0
On 2
Slow 1
flashing
Note: The LED next to the DSS button for all other types of extensions is always
off and has no meaning.
Message status operation is in effect when the user presses the Message Status
button (the lower left feature button on the first DSS) line in normal operation,
supervisory operation, or Extension Status operation. The green LED next to the
Message Status button is on when message status operation is active.
In normal call-handling operation, title the position is in message status
operation, the red LEDs next to the DSS buttons for user extensions indicate
whether or not the message-waiting LED was turned on by a system operator
and do not indicate whether or not a message-waiting LED was turned on by
another source, such as a fax machine or another user. An LED associated with
a calling group extension or a pool dial-out code is always off while the position
is in the message status operation.
If a system operator wants to turn on the message-waiting LED to indicate that a
message is waiting, the system operator first checks the LED next to the
receiver's DSS button to determine whether or not the Message LED is on. To
turn the message on or off, the system operator presses the programmed
Send/Remove Message button followed by the DSS button for the message
receiver and presses the Message Status button to return to normal call
handling. MLX DLC system operators can also use the Send/Remove Message
feature by pressing the Feature button and selecting Send/Remove Message
from the display. See "Messaging" in this chapter for more information on
sending and receiving messages.
Meaning
The room is occupied and the telephone is in regular
call-handling state.
The room is vacant and outside calls cannot be made
from the telephone.
The room is vacant and ready for cleaning. Outside
calls cannot be made from the telephone.