Codes Displayed On The Error/Status Display - AT&T MERLIN LEGEND Release 3.1 Maintenance And Troubleshooting Manual

Processor Problems
Table 4–2. Codes Displayed on the Error/Status Display During Forced
Installation
Code Meaning
Upgrade is in progress. No action required
Install is in progress.
Incorrect memory card
type
Memory card corrupted Insert new memory card and repeat
Incorrectly inserted or
missing memory card
Bad processor board
Unknown
NOTE:
Certain conditions force the system to retry the forced installation. The dot on
the error code/status display becomes lit at the start of the first retry. (Look
carefully; the dot may be hard to see.)
4–26
Control Unit Problems
Action
No action required
Insert correct memory card and repeat
forced installation procedure.
forced installation procedure.
Insert memory card correctly and
repeat forced installation procedure.
Check that memory card is inserted
correctly and try installation again. If it
fails again, replace the processor
module.
Try installation again with a new
memory card. If it fails again, contact
your technical support organization.