T1 Carrier To Rgi; T1 Carrier Directly To Rgi - AT&T System 85 Installation And Test
Release 2 versions 1, 2, 3, and 4. remote module and remote group interface
Hide thumbs
Also See for System 85:
- User manual (44 pages) ,
- User manual (55 pages) ,
- Upgrade manual (240 pages)
Table of Contents
Advertisement
Ti Carrier to RGI
The RGI power, grounding, and alarm leads are covered on the preceding page.
Before the 25-pair cables are attached to the DO_ connectors, place the 4A cable retainer
clip; on the connector. If the J 58889AN-2, List 8 filter is being used, extensions (845798081)
must be used with the retaining clip. After the clips are in place, connect the cables. Then
snap the latch at the retainer into place. Detailed instructions are furnished with the RGH.
T1 Carrier Directly to RGI
Connect the Ti carrier directly to the RGI using the information in Figure 102.
TO VOICE AND
DATA FACILITIES
TO Ti
CARRIER
EM1 FILTER
J58889 AN-2 LIST 8
(NOTE)
ED-1E434-11
GRP 300
ED -1E434-11
GRP 380 ,
NOTE:
This filter is required only if
RGH is equipped with ANN17B, but
each connector associated with
ANN17B requires a filter.
REMOTE GROUP
HOUSING
01, 02, 03,
04, 07, OR DO
DO OR 05
Figure 102. T1 Carrier Directly to RGI
Page 151
Advertisement
Table of Contents
