Replacing T640 Router Hardware Components; Tools And Parts Required To Replace The T640 Hardware Components; Table 32: Tools And Parts Required For Component Replacement - Juniper T640 Hardware Manual

CHAPTER 17
Replacing T640 Router Hardware
Components

Tools and Parts Required to Replace the T640 Hardware Components

Copyright © 2010, Juniper Networks, Inc.
Tools and Parts Required to Replace the T640 Hardware Components on page 175
Replacing the T640 CIP on page 177
Replacing the T640 Connections to Routing Engine Interface Ports on page 180
Replacing the T640 Cooling System Components on page 186
Replacing a T640 Craft Interface on page 196
Replacing the T640 Host Subsystem Components on page 198
Replacing a T640 SCG on page 210
Replacing a T640 SIB on page 212
Replacing T640 Packet Forwarding Engine Components on page 219
Replacing T640 Power System Components on page 239
To replace hardware components, you need the tools and parts listed in Table 32 on
page 175.

Table 32: Tools and Parts Required for Component Replacement

Components
All
Air filter (front or rear)
CIP
Craft interface
DC power supply
Tool or Part
Electrostatic discharge (ESD) grounding wrist
strap
Phillips (+) screwdrivers, numbers 1 and 2
Phillips (+) screwdrivers, numbers 1 and 2
Phillips (+) screwdrivers, numbers 1 and 2
Phillips (+) screwdrivers, numbers 1 and 2
7/16-in. (11 mm) nut driver
Wire cutters
175