Configuring Domain Maintenance - Novell GROUPWISE 8 - ADMINISTRATION Administration Manual

9 Click File > Exit > Yes to save the link changes for the sending domain and return to the main
ConsoleOne window.
10 Continue with
Modifying the Incoming Transfer Pull Link
1 In ConsoleOne, connect to the receiving domain:
1a Click Tools > GroupWise System Operations > Select Domain
1b Browse to and select the domain database (
1c Click Open.
1d Click OK.
2 Click Tools > GroupWise Utilities > Link Configuration.
3 In the drop-down list, select the receiving domain.
4 Click View Domain Links to view outbound and inbound links for the receiving domain.
5 In the Outbound Links from receiving_domain_name list box, double-click the sending domain.
6 Verify that the information displayed in the Edit Domain Link dialog box is correct.
7 Click Transfer Pull Info.
8 Specify the full path to the transfer directory you created.
You can use a UNC path for the NetWare and Windows MTA; you can use a mapped drive
path for the Windows MTA only.
9 Specify the number of seconds after which the MTA checks the transfer directory for message
files to pull.
10 Specify the command needed to reestablish the connection with the transfer directory, if that
connection should be broken for any reason.
11 Click OK until you return to the Link Configuration dialog box.
12 Click File > Exit > Yes to save the link changes for the receiving domain and return to the main
ConsoleOne window.
13 Stop and restart the MTAs for both domains.

41.4 Configuring Domain Maintenance

You can configure the MTA to synchronize user information in the GroupWise Address Book with
user information in eDirectory. You can also configure it to gather information about all messages
that pass through the domain for tracking purposes.
Section 41.4.1, "Using eDirectory User Synchronization," on page 653
Section 41.4.2, "Enabling MTA Message Logging," on page 658
652 GroupWise 8 Administration Guide
"Modifying the Incoming Transfer Pull Link" on page 652.
) in the receiving domain.
wpdomain.db