User - Novell GROUPWISE 8 - ADMINISTRATION Administration Manual

Syntax:
Example:

39.106 /user

Provides the network user ID for the POA to use when accessing post offices and/or document
storage areas on remote servers. You can also provide user and password information on the Post
Office Settings page in ConsoleOne. For the NetWare POA, see
Agent Access
Syntax:
Example:
NetWare:
Linux:
Windows:
See also /password
Windows Note: The Windows POA gains access to the post office directory when it starts.
However, a particular user might attempt to access a remote document storage area to which the
POA does not yet have a drive mapping available. By default, the POA attempts to map a drive
using the same user ID and password it used to access the post office directory. If the user ID and
password for the remote storage area are different from the post office, then use the /user and /
password switches to specify the needed user ID and password. You can also provide user and
password information on the Post Office Settings page in ConsoleOne. However, it is preferable to
use the same user ID and password on all servers where the POA needs access.
616 GroupWise 8 Administration Guide
NetWare POA
/threads-number
/threads-10
(Optional)" in "Installing GroupWise
NetWare POA
/user-eDirectory_user_ID
/user-GWAgents
The eDirectory_user_ID is a user that the POA can use to log in to the remote NetWare
server.
On OES Linux, the Linux_user_ID is a LUM-enabled user that the POA can use to log in
to the remote OES Linux server. On SLES Linux, it is a standard Linux user.
The Windows_user_ID is a user that the POA can use to log in to the remote Windows
server.
and /dn.
Linux POA
--threads number
--threads 15
"Creating a NetWare Account for
Agents" in the
Linux POA
--user Linux_user_ID
--user GWAgents
Windows POA
/threads-number
/threads-20
GroupWise 8 Installation
Windows POA
/user-Windows_user_ID
/user-GWAgents
Guide.