Binding The Poa To A Specific Ip Address - Novell GROUPWISE 8 - ADMINISTRATION Administration Manual

For a sample message flow for this configuration, see
Offices Successful" in "Message Delivery to a Different Post
Troubleshooting 3: Message Flow and Directory
Corresponding Startup Switches You can also use the
switches in the POA startup file to set the outgoing IP address and port.
Using Mapped or UNC Links between the Post Office and the Domain
To change from a TCP/IP link to a mapped or UNC link between a post office and its domain:
1 In ConsoleOne, click Tools > GroupWise Utilities > Link Configuration.
2 In the drop-down list, select the domain where the post office resides.
3 Click Post Office Links, then double-click the post office for which you want to change the link
protocol.
4 In the Protocol field, select Mapped or UNC.
5 Provide the location of the post office in the format appropriate to the selected protocol.
6 Click OK.
7 To exit the Link Configuration tool and save your changes, click File > Exit > Yes.
ConsoleOne then notifies the POA and MTA to restart using the new link protocol.

36.1.4 Binding the POA to a Specific IP Address

You can now cause the POA to bind to a specified IP address when the server where it runs uses
multiple IP addresses. The specified IP address is associated with all ports used by the agent.
Without an exclusive bind, the POA binds to all IP addresses available on the server.
1 In ConsoleOne, browse to and right-click the POA object, then click Properties.
2 Click GroupWise > Network Address to display the Network Address page.
3 Select Bind Exclusively to TCP/IP Address, then click OK to save your change.
"TCP/IP Link Open: Transfer between Post
Office" in GroupWise 8
Structure.
/mtpoutipaddr and /mtpoutport startup
Configuring the POA 495