Novell GROUPWISE 8 - ADMINISTRATION Administration Manual page 846

Option
auto
userid
po
domain
/aqor
The user part of a GroupWise user's outbound Internet address (user@host) can and sometimes
must include the full Groupwise address (domain.post_office.user_ID@host) in order to be unique.
The /aqor switch instructs the Internet Agent to move any GroupWise address components, except
the user_ID component, to the right side of the address following the at sign (@). In this way,
GroupWise addressing components become part of the host portion of the outbound Internet
address. The
For example, if the /aqor switch is used (in conjunction with the /aql-domain switch), Bob
Thompson's fully qualified Internet address (headquarters.advertising.bob@novell.com) would be
resolved to bob@advertising.headquarters.novell.com for all outbound messages.
If the /aqor switch is used with the /aql-po switch, Bob's Internet address would be resolved to
bob@advertising.novell.com for all outbound messages.
If you use the /aqor switch to move GroupWise domain or post office names to be part of the host
portion on the right side of the address, you must provide a way for the DNS server to identify the
GroupWise names. You must either explicitly name all GroupWise post offices and domains in your
system as individual MX Records, or you can create an MX Record with wildcard characters to
represent all GroupWise post offices and domains. For information about creating MX Records, see
details found in RFC #974.
For details about this setting, see
Mail Addresses," on page
/ari
Enables or disables additional routing information that is put in the SMTP return address to facilitate
replies. This switch might be needed in large systems with external GroupWise domains in which
the external GroupWise users have not been configured in your local domain. Options include Never
and Always. Most sites do not need to use this switch.
Syntax: /ari-never|always
846 GroupWise 8 Administration Guide
Description
This option causes the gateway to include the addressing components required to make the
user's address unique. If a user ID is unique in a GroupWise system, the outbound address
uses only the user_ID. If the post_office or domain.post_office components are required to
make the address unique, these components are also included in the outbound address. The
auto option is the default.
This option requires the gateway to include only the user_ID in the outbound Internet
address, even if the user ID is not unique in the system. If a recipient replies to a user whose
user ID is not unique and no other qualifying information is provided, that reply cannot be
delivered.
This option requires the gateway to include post_office.user_ID in every outbound address,
regardless of the uniqueness or non-uniqueness of the user ID.
This option requires the gateway to include the fully-qualified GroupWise address
(domain.post office.user_ID) in every outbound address, regardless of the uniqueness or
non-uniqueness of the user ID. This option guarantees the uniqueness of every outbound
Internet address, and ensures that any replies are delivered.
/aql switch specifies which components are included.
Section 46.1.3, "Configuring How the Internet Agent Handles E-
735.