Novell GROUPWISE 8 - ADMINISTRATION Administration Manual page 1079

Remote Properties
Users can change the way Remote mode is set up, including the connection, time zone, signature,
and so forth, in Account Options on the Accounts menu. Remote is listed as an account.
By default, if an item is deleted from the Remote mailbox, the item is deleted from the Online
mailbox the next time a connection is made. Deletion options in Remote Properties can be changed
so that an item deleted from the Remote mailbox stays in the Online mailbox or vice versa.
Remote Mode Connections
"Setting Up a Modem Connection" on page 1079
"Setting Up a Network Connection" on page 1080
"Setting Up a TCP/IP Connection" on page 1081
Setting Up a Modem Connection
If you are going to connect with a modem, you must create at least one modem connection. A
modem connection provides GroupWise with the information it needs to connect to the GroupWise
system through the GroupWise Async Gateway or GroupWise X.25 Gateway.
To set up a modem connection:
1 In the client, log in or change to Remote mode.
2 Click Accounts > Send/Retrieve > GroupWise Options.
3 Click Configure > Connect To > New.
4 Make sure Modem is selected, then click OK.
5 Type a descriptive name for the modem connection in the Connection Name box.
6 Click the country code, then type the area code and phone number for the gateway to the master
GroupWise system.
You can use a comma (,) to signal a one-second pause in dialing such as 9, (800) 555-5555.
The 9 accesses an outside line and the comma causes a one-second pause to wait for the dial
tone before dialing the number. If you enter dashes, spaces, and parentheses, they are ignored.
7 Type the login ID for the gateway.
8 Click Password, type the gateway password, then click OK.
9 Retype the password, then click OK.
10 Click the Advanced tab.
11 If your modem requires a script, specify the path to the script in the Modem Script box, click
Edit Script, then specify the necessary When Given and Respond With commands.
To save the script without changing its filename, click Save > Close.
or
To save the script with a new filename, click Save As, type a name, then click Close.
12 Click a disconnect method.
Setting Up GroupWise Modes and Accounts 1079