Copying And Compiling The Mta Mib File - Novell GROUPWISE 8 - ADMINISTRATION Administration Manual

4 Continue through the rest of the installation process as prompted by the Agent Installation
program.
The Agent Installation program copies the SNMP support files to the agent installation
directory, makes the appropriate Windows registry entries, and restarts the Windows SNMP
service.
5 Continue with

42.6.2 Copying and Compiling the MTA MIB File

An SNMP-enabled MTA returns information contained in a Management Information Base (MIB).
The MIB is an ASCII data structure that defines the information gathered. It also defines the
properties that can be monitored and managed on the SNMP-enabled MTA.
Before you can monitor an SNMP-enabled MTA, you must compile the gwmta.mib file using your
SNMP management program.
NetWare and
Windows:
Linux:
1 Copy the
SNMP management program.
ZENworks Server Management users can access the gwmta.mib file in the software
distribution directory.
2 Compile or import the
For example, to compile the gwmta.mib file for ZENworks Server Management:
2a In ConsoleOne, right-click the Site Server object, then click Properties > MIB Pool.
2b Click Modify Pool > Add.
2c Browse to and select the
2d Click Compile.
2e Make sure that the server where the MTA is running is configured to send SNMP traps to
the ZENworks Server Management Site Server.
NetWare:
Windows:
Refer to your SNMP management program documentation for further instructions.
3 Continue with
686 GroupWise 8 Administration Guide
Section 42.6.2, "Copying and Compiling the MTA MIB File," on page
The GroupWise MIBs are located on the GroupWise 8 DVD or downloaded GroupWise 8
image in the
\agents\snmp
software_distribution_directory\agents\snmp
it with the latest GroupWise software.
The GroupWise MIBs are located on the GroupWise 8 DVD or downloaded GroupWise 8
image in the /agents/snmp directory
file from the
gwmta.mib
gwmta.mib
gwmta.mib
Add the IP address or hostname of the ZENworks Server Management Site
Server to the traptarg.cfg file in the
Add the IP address or hostname of the ZENworks Server Management Site
Server to the list of trap destinations. For example, in Windows Server 2003,
click Start > Control Panel > Administrative Tools > Services. Right-click SNMP
Trap Service, then click Properties. On the Traps tab, add the IP address or
hostname of the ZENworks Server Management Site Server.
Configuring the MTA for SNMP
directory or in the
.
directory to the location required by your
\agents\snmp
file as required by your SNMP management program.
file, then click OK.
sys:\etc
Monitoring.
686.
directory if you have updated
directory.