Configuring The Poa In Consoleone - Novell GROUPWISE 8 - ADMINISTRATION Administration Manual

7 In the Description field, type one or more lines of text describing the POA.
This description displays on the POA server console as the POA runs. When you run multiple
POAs on the same server, the description should uniquely identify each one. If multiple
administrators work at the server where the POA runs, the description could include a note
about who to contact before stopping the POA.
8 In the Platform field, select the platform (NetWare, Linux, or Windows) where the POA will
run.
9 Continue with Section 36.1.2, "Configuring the POA in ConsoleOne," on page

36.1.2 Configuring the POA in ConsoleOne

The advantage to configuring the POA in ConsoleOne, as opposed to using startup switches in a
POA startup file, is that the POA configuration settings are stored in eDirectory.
1 In ConsoleOne, expand the eDirectory container where the Post Office object is located.
2 Expand the Post Office object.
3 Right-click the POA object, then click Properties.
The table below summarizes the POA configuration settings in the POA object properties pages and
how they correspond to POA startup switches (as described in
Switches," on page 581). The table also includes settings on the Post Office object that correspond
to POA startup switches.
POA Configuration Settings
Table 36-2
ConsoleOne Properties Pages
and Settings
POA Identification Page
Corresponding Tasks and Startup Switches
489.
Chapter 39, "Using POA Startup
Configuring the POA 489