Novell GROUPWISE 8 - ADMINISTRATION Administration Manual page 572

To configure a basic dedicated indexing POA:
1 Create a new POA object for the post office as described in
Object in eDirectory," on page
2 Right-click the new POA object, then click Properties.
3 Click GroupWise > QuickFinder to display the QuickFinder page.
4 Make sure Enable QuickFinder Indexing is selected.
5 In the Start QuickFinder Indexing field, specify the number of hours and minutes after
midnight you want the POA to start its indexing cycle.
The default is 20, meaning at 8:00 p.m.
6 Set QuickFinder Update Interval low enough to keep up with the indexing demands of your
GroupWise client users.
To avoid overloading the POA with indexing processing, a maximum of 1000 items are
indexed per database for each indexing cycle. If a very large number of messages are received
regularly, you should configure the POA with very frequent indexing cycles in order to get all
messages indexed in a timely manner.
For continuous QuickFinder
7 Click Apply to save the updated QuickFinder settings.
8 Click GroupWise > Agent Settings.
9 Set Message File Processing to Off. Make sure another POA handles message file processing.
10 Deselect Enable Client/Server and set Client/Server Handler Threads to 0. Make sure another
POA handles client/server processing.
11 Select Disable Administration Task Processing, so that this POA does not run an admin thread.
Make sure that another POA handles administration tasks.
12 Click Apply to save the updated agent settings.
13 Click GroupWise > Maintenance.
572 GroupWise 8 Administration Guide
488.
indexing, set QuickFinder Update Interval to 0 (zero).
TM
Section 36.1.1, "Creating a POA