Novell GROUPWISE 8 - ADMINISTRATION Administration Manual page 950

You cannot use the Web console to change any of the WebAccess Agent's settings. Changes must
be made through ConsoleOne, the WebAccess Agent console, or the startup file.
Refer to the following sections for information about enabling and using the Web console:
"Enabling the WebAccess Agent Web Console" on page 950
"Viewing the WebAccess Agent Web Console" on page 951
Enabling the WebAccess Agent Web Console
The default HTTP port for the WebAccess Agent Web console is established during WebAccess
Agent installation. You can change the port number and increase security after installation in
ConsoleOne.
1 In ConsoleOne, right-click the WebAccess Agent object, then click Properties.
2 Click GroupWise > Network Address to display the Network Address page.
3 In the HTTP Port field, specify a port number. We recommend that you use port 7211 if it is not
already in use on the WebAccess Agent's server.
Assigning a port number enables the Web console; assigning 0 as the port number disables the
Web console.
Any user who knows the WebAccess Agent's IP address (or hostname) and the HTTP port
number can use the Web console. If you want to restrict Web console access, you can assign a
username and password. To do so:
4 Click the GroupWise tab, then click Optional Gateway Settings to display the Optional
Gateway Settings page.
950 GroupWise 8 Administration Guide