Imapssl; Imapsslport; Incorrectloginattempts; Internalclientssl - Novell GROUPWISE 8 - ADMINISTRATION Administration Manual

39.24 /imapssl

Sets the availability of secure SSL communication between the POA and IMAP clients. Valid
settings are enable and disable. See
to the POA," on page
Syntax:
Example:
See also /imap, /imapmaxthreads, /imapport, /imapsslport, and /imapreadlimit.

39.25 /imapsslport

Sets the TCP port number used for the POA to communicate with IMAP clients when using an SSL
connection. The default is 993. See
Syntax:
Example:
See also/imap, /imapmaxthreads, /imapport, /imapssl, and /imapreadlimit.

39.26 /incorrectloginattempts

Specifies the number of unsuccessful login attempts after which lockout occurs. The default is 5
attempts; valid values range from 3 to 10. See
page 519.
NetWare POA
Syntax: /incorrectloginattempts-
number
Exampl /incorrectloginattempts-3
e:
See also /intruderlockout, /attemptsresetinterval, and /lockoutresetinterval.

39.27 /internalclientssl

Sets the availability of secure SSL communication between the POA and GroupWise clients that are
running inside your firewall. Valid values are enabled, required, and disabled. See
"Securing the Post Office with SSL Connections to the POA," on page
592 GroupWise 8 Administration Guide
Section 36.3.3, "Securing the Post Office with SSL Connections
511.
NetWare POA
/imapssl-setting
/imapssl-enable
Section 36.2.3, "Supporting IMAP Clients," on page
NetWare POA
/imapsslport-port_number
/imapsslport-994
Linux POA
--imapssl setting
--imapssl enable
Linux POA
--imapsslport port_number
--imapsslport 995
Section 36.3.5, "Enabling Intruder Detection," on
Linux POA
--incorrectloginattempts
number
--incorrectloginattempts 10
Windows POA
/imapssl-setting
/imapssl-enable
502.
Windows POA
/imapsslport-port_number
/imapsslport-996
Windows POA
/incorrectloginattempts-
number
/incorrectloginattempts-10
Section 36.3.3,
511.