Novell GROUPWISE 8 - ADMINISTRATION Administration Manual page 655

6b Fill in the following fields:
Available LDAP Servers: Select the LDAP server that you want the Linux or Windows
MTA to log into in order to gain access to eDirectory, then click Set Preferred.
LDAP User Name: Browse to and select the user that the Linux or Windows MTA can
use to log in as. The selected user must have rights to browse properties of User objects.
Click Set Password, provide the password associated with the user selected above, then
click Set Password.
LDAP Group: Browse to and select the LDAP Group object for the server where the
MTA runs. The LDAP Group object provides a table of attribute mappings between
eDirectory and LDAP that the MTA needs in order to perform eDirectory user
synchronization on Linux or Windows.
6c Click OK to save the LDAP information.
The eDirectory Access column for that Linux or Windows MTA should now display Yes
so that you can enable it.
7 If your GroupWise system spans multiple trees, repeat
enable eDirectory user synchronization for at least one MTA in each tree.
8 Click OK to return to the eDirectory User Synchronization Configuration dialog box.
Each domain for which you have configured the MTA for eDirectory user synchronization
should now display Enabled in the Status column.
9 If all domains are now enabled, click OK to return to main ConsoleOne window, then continue
with "Scheduling eDirectory User Synchronization" on page
Step 3 through Step 6 as needed to
657.
Configuring the MTA 655