Novell GROUPWISE 8 - ADMINISTRATION Administration Manual page 960

Logging Level: There are four logging levels: Off, Normal, Verbose, and Diagnostic. Off turns
logging off; Normal displays initial statistics, user logins, warnings, and errors; Verbose
displays normal logging plus user requests; and Diagnostic displays Verbose logging plus
thread information. The default is Normal logging. Use Diagnostic only if you are
troubleshooting a problem with WebAccess.
The verbose and diagnostic logging levels do not degrade WebAccess Agent performance, but
log files saved to disk consume more disk space when verbose or diagnostic logging is in use.
Max Log File Age: Specify the number of days you want the WebAccess Agent to retain old
log files. The WebAccess Agent retains the log file for the specified number of days unless the
maximum disk space for the log files is exceeded. The default age is 30 days.
Max Log Disk Space: Specify the maximum amount of disk space you want to use for log
files. If the disk space limit is exceeded, the WebAccess Agent deletes log files, beginning with
the oldest file, until the limit is no longer exceeded. The default disk space is 102400 KB (100
MB).
4 Click OK to save the log settings.
Modifying WebAccess Agent Log Settings through Startup Switches
Startup switches override any log settings you specified through ConsoleOne. See
WebAccess Agent Log Settings in ConsoleOne" on page
For information about startup switches that can be used to modify log settings, see
"Using WebAccess Startup Switches," on page
Modifying WebAccess Agent Log Settings through the WebAccess Agent Server
Console
"Modifying Log Settings through the NetWare Agent Server Console" on page 960
"Modifying Log Settings through the Windows WebAccess Agent Server Console" on
page 961
"Modifying Log Settings through the Linux WebAccess Agent Server Console" on page 961
Modifying Log Settings through the NetWare Agent Server Console
You can use the NetWare WebAccess Agent server console to modify the following log settings:
Changes you make to log settings at the console apply only to the current session. When you restart
the WebAccess Agent, the log settings are reset to the settings specified in ConsoleOne or the
startup switches. See
"Modifying WebAccess Agent Log Settings through Startup Switches" on page
To modify the log settings:
1 At the NetWare WebAccess Agent's server console, press F10, select Logging Options, then
set the log settings as needed:
2 Press Esc to save the information.
960 GroupWise 8 Administration Guide
"Modifying WebAccess Agent Log Settings in ConsoleOne" on page 959
959.
965.
"Modifying
Section 57,
and
960.