Installing Additional Webaccess Components; Installing Additional Components On Netware Or Windows - Novell GROUPWISE 8 - ADMINISTRATION Administration Manual

53.2 Installing Additional WebAccess
Components
The following sections assume that you have installed at least one WebAccess Agent and one
WebAccess Application (or WebPublisher Application) and now need to install additional agents or
applications.
Before GroupWise 8, you could successfully run different versions of the WebAccess Agent and the
WebAccess Application together. For example, you could install a new version of the WebAccess
Application on your Web server while still running the previous version of the WebAccess Agent
for the domain.
Starting in GroupWise 8, the recommended update procedure is to update all the WebAccess Agents
in your GroupWise system first, then update all the WebAccess Applications. Long-term use of the
mixed-version configuration is not supported and can result in time zone problems. You must update
both the WebAccess Agent and the WebAccess Application to the same version in order to ensure
proper functioning of the GroupWise 8 WebAccess client.
IMPORTANT: Running a new WebAccess Application with an older WebAccess Agent is no
longer supported.
Section 53.2.1, "Installing Additional Components on NetWare or Windows," on page 880
Section 53.2.2, "Installing Additional Components on Linux," on page 881
53.2.1 Installing Additional Components on NetWare or
Windows
"Installing a NetWare or Windows WebAccess Agent" on page 880
"Installing a NetWare or Windows WebAccess or WebPublisher Application" on page 881
For more information, see
GroupWise 8 Installation
Installing a NetWare or Windows WebAccess Agent
1 Run
setup.exe
Click Install Products > Install GroupWise WebAccess.
or
If you have already copied the GroupWise WebAccess software to a software distribution
directory, run
2 Click Yes to accept the license agreement and display the Select Components dialog box.
3 Deselect all components except the GroupWise WebAccess Agent, then click Next.
4 Follow the prompts to create the WebAccess Agent's gateway directory, install the WebAccess
Agent software, and create the WebAccess Agent's object in Novell
880 GroupWise 8 Administration Guide
"NetWare and Windows: Setting Up GroupWise
Guide.
at the root of the GroupWise 8 DVD or downloaded GroupWise 8 image.
from the
setup.exe internet\webacces
WebAccess" in the
directory.
®
eDirectory
TM
.