Adjusting The Poa Logging Level And Other Log Settings - Novell GROUPWISE 8 - ADMINISTRATION Administration Manual

NetWare Only the first 8 characters of the post office name are used in the filename. The
and startup file is typically located in the directory where the POA software is installed.
Windows:
Linux: The full post office name is used in the filename. However, all letters are lowercase
and any spaces in the post office name are removed. The startup file is located in the
/opt/novell/groupwise/agents/share
3 Adjust the setting of the
4 Save the POA startup file.
5 Start the POA for the new post office location, as described in the following sections in the
GroupWise 8 Installation
"Starting the NetWare GroupWise
"Starting the Linux Agents with a User
"Starting the Windows GroupWise
6 Adjust the link between the post office and the domain. See
MTA for a New Location of a Domain or Post Office," on page
36.1.7 Adjusting the POA Logging Level and Other Log
Settings
When installing or troubleshooting the POA, a logging level of Verbose can be useful. However,
when the POA is running smoothly, you can set the logging level down to Normal to conserve disk
space occupied by log files.
1 In ConsoleOne, browse to and right-click the POA object, then click Properties.
2 Click GroupWise > Log Settings to display the Log Settings page.
3 Set the desired settings for logging.
/home switch to point to the new location of the post office directory.
Guide:
Agents"
Interface"
Agents"
directory.
Section 41.1.7, "Adjusting the
640.
Configuring the POA 497