Enabling Smtp Relaying - Novell GROUPWISE 8 - ADMINISTRATION Administration Manual

For example, if you set Messages to 20, Kilobytes to 100, and Minutes to 60, the Internet Agent
instructs the routing service to initiate a dial-up connection when 20 messages have
accumulated in the queue, when the total size of the messages in the queue reaches 100 K, or
when 60 minutes have passed since the last connection.
Dial Parameters: The dial parameters serve two purposes: 1) the Internet Agent passes the
Redial Interval and Idle Time Before Hangup parameters to the routing service to use when
initiating a connection to send outbound messages, and 2) the Internet Agent uses the Polling
Interval parameter to determine how often the routing service should initiate a connection to
check for inbound messages. The Polling Interval parameter is required.
Specify the interval between redials (default is 30 seconds), the amount of time to wait before
hanging up when there are no messages to process (default is 60 seconds), and the interval
between polling for inbound messages (default is 0 minutes).
3 Click OK to add the profile to the Profiles list.
4 To apply the profile to a block of time, see
Editing a Profile
1 Select the profile you want to edit, then click Edit to display the Edit Profile dialog box.
2 Modify the desired fields. For information about each of the fields, click the Help button in the
Edit Profile dialog box or see
3 Click Apply to save the changes or click OK to save the changes and close the page.
Deleting a Profile
1 Select the profile you want to remove from the list, then click Delete.
2 Click Apply to save the changes or click OK to save the changes and close the page.

46.1.8 Enabling SMTP Relaying

You can enable the Internet Agent to function as a relay host for Internet messages. The Internet
Agent can relay messages received from all Internet hosts, or you can select specific hosts for which
you allow it to relay.
1 In ConsoleOne, right-click the Internet Agent object, then click Properties.
2 Click Access Control > SMTP Relay Settings.
"Applying a Profile" on page
"Creating a Profile" on page
744.
744.
Configuring Internet Services 745