Modifying Log Settings In Consoleone - Novell GROUPWISE 8 - ADMINISTRATION Administration Manual

Maximum Disk Space
Log File Location
The log settings in ConsoleOne are used as the default settings. Startup switches override the
ConsoleOne log settings, and console settings override startup switches.
Section 49.6.1, "Modifying Log Settings in ConsoleOne," on page 810
Section 49.6.2, "Modifying Log Settings through Startup Switches," on page 811
Section 49.6.3, "Modifying Log Settings through the Internet Agent Server Console," on
page 812
Section 49.6.4, "Viewing Log Files," on page 813

49.6.1 Modifying Log Settings in ConsoleOne

Through ConsoleOne, you can configure the following log settings:
Log file location
Logging level (applies to both console logging and disk logging)
Maximum age for log files
Maximum disk spaced used for log files
The ConsoleOne settings are the default settings. The Internet Agent uses these settings unless you
override them with startup switches in the gwia.cfg startup file or at the server console.
To configure the default log settings in ConsoleOne:
1 Right-click the Internet Agent object, then click Properties.
2 Click GroupWise > Log Settings to display the Log Settings page.
810 GroupWise 8 Administration Guide
Startup
ConsoleOne
Switches
Yes Yes
Yes Yes
NetWare Linux
Console Console
No Yes
No No
Windows
Console
Yes
No