Configuring Database Maintenance - Novell DATA SYNCHRONIZER - ADMINISTRATION GUIDE 07-2010 Administration Manual

2b Specify the fully distinguished name (
the user that is having problems, then click Add User.
A progress box displays briefly, but you do not need to click OK in it. You return
automatically to the Logging section.
2c Click Advanced to see that the user has been added to the list.
When one user is having problems, but other users are not, it can be helpful to log events
for a successfully working user in order to compare the logs of the two users.
3 (Optional) Repeat
Each user's log file, named
directory:
/var/log/datasync/targets
4 Review the user log files to help resolve the problem.
5 Disable per-user logging:
5a Return to the Logging section of the Engine Configuration page.
5b Click

3.2.4 Configuring Database Maintenance

Synchronizer uses a PostgreSQL database to store Synchronizer system configuration information
and pending events when synchronization between the Sync Engine and connectors is interrupted.
By default, automatic database maintenance cleans up orphaned and expired records every 2
hours.You can change this interval as needed. For example, you might prefer one-time nightly
maintenance.
1 In
Synchronizer Web
Configuration page, then click Edit XML Source to display the Engine XML Source window.
2 Add the following tags between the
<cacheCleanupInterval>seconds</cacheCleanupInterval>
3 Replace
For example, you could specify 86400 to perform database maintenance once a day, at
midnight.
4 Click Save XML to save your change, then click Edit Settings Form to return to the Engine
Configuration page.
5 In a terminal window, restart the Sync Engine to put the new database maintenance setting into
effect.
rcdatasync_syncengine restart
22 Novell Data Synchronizer Administration Guide
Step 2 for a successfully working user.
user_distinguished_name.log
to delete each user for whom per-user logging was enabled.
Admin, click the Sync Engine (
with the time interval for database maintenance.
seconds
cn-username,ou-orgunit,o=organization
default
and
<settings> </settings>
, is created in the following
) to display the Engine
tags:
) of