Novell GROUPWISE 8 - ADMINISTRATION Administration Manual page 513

or
For optimum security, select Required in the IMAP SSL drop-down list if you want the POA to
force SSL connections, so that non-SSL connections from IMAP clients are denied.
8 To use SSL connections between the POA and SOAP clients, select Required in the Internal
SOAP SSL drop-down list and/or the External SOAP SSL drop-down list so that internal and/or
external SOAP clients must use SSL connections to the POA.
9 Click Apply to save the settings on the Network Address page.
You are prompted the supply the SSL certificate and key files. The key file must be password
protected in order for SSL to function correctly.
10 Click Yes to display the SSL Settings page.
For background information about certificate files and SSL key files, see
Certificates and SSL Encryption," on page
By default, the POA looks for the certificate file and SSL key file in the same directory where
the POA executable is located, unless you provide a full pathname.
11 In the Certificate File field, browse to and select the public certificate file provided to you by
your CA.
12 In the SSL Key File field:
12a Browse to and select your private key file.
12b Click Set Password.
12c Provide the password that was used to encrypt the private key file when it was created.
12d Click Set Password.
13 Click OK to save the SSL settings.
ConsoleOne then notifies the POA to restart and access the certificate and key files.
Corresponding Startup Switches You can also use the /certfile, /keyfile, /keypassword, /httpssl,
mtpssl, /imapssl, and /imapsslport
1161.
switches in the POA startup file to configure the POA to use SSL.
Section 75.2, "Server
/
Configuring the POA 513