Configuring The Webaccess Agent; Modifying Webaccess Settings - Novell GROUPWISE 8 - ADMINISTRATION Administration Manual

54.1 Configuring the WebAccess Agent

The WebAccess Agent receives user requests from the WebAccess Application and WebPublisher
Application, accesses post offices and libraries to process the requests, and then passes information
back to the applications.
Figure 54-3
Web
Browser
During installation, the GroupWise
However, you can use the information in the following sections to optimize the WebAccess Agent
for your environment:
Section 54.1.1, "Modifying WebAccess Settings," on page 892
Section 54.1.2, "Modifying WebPublisher Settings," on page 893
Section 54.1.3, "Managing Access to Post Offices," on page 895
Section 54.1.4, "Securing WebAccess Agent Connections with SSL," on page 897
Section 54.1.5, "Changing the WebAccess Agent's Network Address or Port Numbers," on
page 899
Section 54.1.6, "Binding the WebAccess Agent to a Specific IP Address," on page 900

54.1.1 Modifying WebAccess Settings

Using ConsoleOne
WebAccess Agent:
The maximum number of threads the agent uses to process WebAccess messages
The key used to encrypt information sent between the agent and the WebAccess Application
To modify the configuration information:
1 In ConsoleOne, right-click the WebAccess Agent object, then click Properties.
2 Click WebAccess > Settings to display the WebAccess Settings page.
892 GroupWise 8 Administration Guide
WebAccess Agent
Speller
Application
WebAccess
Application
Web
Server
WebPublisher
Application
®
®
, you can configure the following GroupWise WebAccess settings for the
LDAP
Server
LDAP Provider
GroupWise Provider
WebAccess
Agent
Document
Service Provider
Viewer
Agent
WebAccess Agent is set up with a default configuration.
Post Office
Library