Timeouts - Novell GROUPWISE 8 - ADMINISTRATION Administration Manual

/etrnqueue
Specifies your e-mail domain as provided by your Internet Service Provider. See "Enabling Dial-Up
Services" on page 742.
Syntax: /etrnqueue-email_domain
Example: /etrnqueue-novell.com
/dialuser (Windows Only)
Specifies the RAS Security user if you are using a Windows Remote Access Server (RAS) and the
Internet Agent is not running on the same server as the RAS.
Syntax: /dialuser-username
Example: /dialuser-rasuser
/dialpass (Windows Only)
Specifies the RAS Security user's password if you are using a Windows Remote Access Server
(RAS) and the Internet Agent is not running on the same server as the RAS.
Syntax: /dialpass-password
Example: /dialpass-raspassword

52.6.9 Timeouts

The following switches specify how long SMTP services waits to receive data that it can process.
After the time expires, the Internet Agent might give a TCP read/write error. Leave these switches at
the default setting unless you are experiencing a problem with communication.
/tc
/td
/te
/tg
/tr
/tt
/tc
Specifies how long the program waits for an SMTP command. The default is 2 minutes.
Syntax: /tc-minutes
Example: /tc-3
/td
Specifies how long the program waits for data from the receiving host. The default is 5 minutes.
Syntax: /td-minutes
Example: /td-2
Using Internet Agent Startup Switches 857